Stiles and Bates
                                         Telephone 01304 366 360             Like Stiles &Bates on Facebook    

 

PDF Pen Instructions

.



Thawte Secured with SSL Encryption

Thread Cutting Kit 3/4 x 6 tpi
Click For Bigger Image
Product Code: WTC213

Thread Cutting Kit 3/4 x  6 tpi

Each kit contains a screw box for cutting the male thread and two taps, a starter and bottom tap for cutting the matching female thread. These kits will cut threads on most firm timbers.
 
Recommended pilot holes for female thread are 1/8" less than diameter. for 3/4" drill 5/8" hole.
 
For male threads, turn the shaft to comfortable fit in the screw box. Rubbing some wax or hard soap on the timber will aid the screw box.
 
Timber to be tapped can be held in a vice or chuck in a lathe if you have a means of locking the spindle, but NOT with the lathe running. If you do decide to hold it in this way, be safe and turn the lathe off at the mains before starting, as it is so easy to hit the start button in error.
 
Images below show male and female in use, bench vice and timber not included.
Click For Bigger Image: Click For Bigger Image:
TitleEx. VATInc. VATQtyBuy
Thread Cutting Kit 3/4 x 6 tpi£38.08£45.70
Accessories
Planet Sawtooth Bit 5/8"£11.00
Replacement (screw box) cutter£10.95



News Page
Read our latest
8th January 2018
.
Our Timber
.
.
.

Terms & Conditions - Stiles and Bates, Upper Farm, Church Hill, Sutton, Dover, Kent. CT15 5DF UK. Tel & Fax 01304 366 360
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Detla.

2018 Stiles and Bates
Thursday 26th April 2018