Stiles and Bates
                                         Telephone 01304 366 360             Like Stiles &Bates on Facebook    

 

PDF Pen Instructions

.



Thawte Secured with SSL Encryption

Cutter No 8 Hollowing Cutter
Click For Bigger Image
Product Code: 851C

851C Hollowing Cutter

Hollowing Cutter is standard on theRS8801H Straight Probe and 851H Sawn Neck Hollower and is very useful (if not my main cutter) in the RS206 Armbrace. It can also be useful on the RS230KT Master Hollower and many other tools that require a small, controllable bit.
 
SHARPENING
We find that the flat cutters are best ground at 10 to 15 to give the best cut.
For shear scraping, the burr created is a vital edge and can be restored by rubbing the edge firmly with a Crown Burnisher or similar hard steel.
After doing this three or four times is best to take the tool back to the grinder to restore the clean burr.
Cutters 6 and 7 are used for hollowing or detail work and are best held in the Cutter Holder and sharpened to 10 to 15.
TitleEx. VATInc. VATQtyBuy
Cutter No 8 Hollowing Cutter£9.33£11.20



News Page
Read our latest
8th January 2018
.
Our Timber
.
.
.

Terms & Conditions - Stiles and Bates, Upper Farm, Church Hill, Sutton, Dover, Kent. CT15 5DF UK. Tel & Fax 01304 366 360
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Detla.

2018 Stiles and Bates
Saturday 21st April 2018