Stiles and Bates
                                         Telephone 01304 366 360             Like Stiles &Bates on Facebook    


PDF Pen Instructions


Thawte Secured with SSL Encryption

Long Grind Jig
Click For Bigger Image
Product Code: PELGJ

Long Grind Jig

For most woodturners, a bowl gouge ground to 45° in a V jig such like PEVBwill cut almost any bowl easily and safely.

That said, the fingernail profile is preferred by many turners but difficult to sharpen evenly without a jig.
The Sorby jig, either used on a grinder or the ProEdge has always been used to create a basic fingernail but after listening to customers’ requests for a longer wing, they have made a new Long Grind Jig block with three holes. The PELGJ can be used on the ProEdge or the 445 and 447.
The first hole is the same as on the standard block and shapes the gouge as in gouge 1 (bottom left). The second hole does gouge 2 (below center) and the third, gouge 3 (bottom right) which is very similar to the famous Ellsworth grind.
Click For Bigger Image: Grind produced from using the first holeClick For Bigger Image: Grind produced from using the second holeClick For Bigger Image: Grind produced from using the third hole
TitleEx. VATInc. VATQtyBuy
Long Grind Jig£9.50£11.40

News Page
Read our latest
8th January 2018
Our Timber

Terms & Conditions - Stiles and Bates, Upper Farm, Church Hill, Sutton, Dover, Kent. CT15 5DF UK. Tel & Fax 01304 366 360
Powered By TABS For Tools We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Detla.

© 2018 Stiles and Bates
Sunday 22nd April 2018