I found the course very informative with regard to woodturning and tool grinding.
It has cured me of most of my bad habits – mainly due to my own ignorance.
You can read the book a hundred times but an hour’s tuition is worth the whole of the course fee!
Most of all, it was fun!!
Gordon Satterley, Ash, Kent.
The Basic Cuts notes are very useful and I look forward to producing my own pieces to compare with the 2 pieces we made in the workshop.
Excellent course, Excellent workshops, Excellent instructor, what more can I say.
I would recommend this course to anybody with the slightest interest.
Rick Godden, Ashford, Kent.
An excellent course. What I have learnt and put into practice over the past two weeks, all [the turnings] now have a better finish.
Being self taught up to now, I realised I had many bad habits.
I enjoyed the course very much. It was well structured and the workshop is excellent. You could not ask for more and Dave Bates’ communications skill are very good – we all had a good time.
I came away with a good understanding of the tools and the best way to use the. Thanks for an excellent course.
Ronald Blake, Gillingham, Kent.
I found the course both helpful and entertaining.
Dave explained the issues clearly and had lots of patience.
It was very useful to go back to basics and learn the correct way to present the tools etc. It was obvious that Dave had done this before (!) and has an aptitude for explaining it well.
Many thanks for an enjoyable two days.
Dennis Knight, Chatham, Kent.
A thoroughly enjoyable course delivered in an informal but professional way.
As tiring as it proved to be, I was actually disappointed when the two days came to an end so quickly.
Ian Lowe, Maidstone, Kent.
Really friendly and relaxed atmosphere with plenty of one-on-one tuition and the opportunity to learn from the other students.
No pressure – even when something goes wrong, which makes the experience even better.
Extremely knowledgeable instructor with excellent communication style.
Finally, excellent sandwiches – compliment to the chef!
David Head, Maidstone, Kent.
I thoroughly enjoyed the course with you an achieved more than I thought I would consider I had only looked at my husband’s lathe before.
I have had a little practice on spindles at home (under supervision) and it went well.
Need a lot more though!
Thank you for teaching a complete beginner the start of a new skill. PS. Your notes on the basic cuts is very helpful – I took them out to the garage before I started ‘playing’ and they gave me the confidence to start.
Mandy Hitchin, Maidstone, Kent.
Very relaxed approach by Dave in regard to instruction, clear and simple.
I got the feeling that nobody would never be asked to do more than one’s ability.
The use of abrasives to a achieve finishes was most interesting.
The catering was well received with endless hot drinks.
PS. The dog was good company.
Vic Brown, Headcorn, Kent.
An excellent course because I knew nothing about woodturning.
I did enjoy it although my nerves may have got the better of me on the second day.
Having said that, the information gleaned on the course as been attempted and put into practice.
I have set my lathe up and am running – practice, practice, practice.
Most of all enjoyed [the] company, thank you.
Christine Sykes, Herne Bay, Kent.
An excellent and rewarding course.
David Bates’ communication skills are first rate and make it all very clear, understandable and leaving you wanting to keep practicing and exploring.
His direct and encouraging approach to his vocation is excellent and makes for a really pleasant experience enjoyed by all participants.
I look forward to a revisit and would certainly recommend you to anyone considering woodturning.
Neil Burman, Medstead, Hampshire.
A very well drive course with good content.
The main emphasis [was] on practical with chips flying, most enjoyable.
Also, the ready assistance and attentive concern made a creative feel about the course.
Left the course feeling quite confident and my new ability but also understanding why the tools had to be used in their various ways.
Sharpening demo good. Time flew really. We were encouraged all the time, I liked that.
John Denman, Birchington, Kent.
The workshop was warm, well lit, well stocked and a delight to be in.
I found Dave to be charming, immensely knowledgeable and patient.
I felt at ease and enjoyed every minute.
Thanks Dave, I look forward to coming on your other courses as my skills improve.
Gordon Blake, Ash, Kent.
This was a thoroughly enjoyable and informative two days. There was a lovely atmosphere allowing everyone to ask questions no matter how silly they seemed. Answers were always full and to the satisfaction of the questioners.
Dave shared his time with everyone and showed great patience when we made mistakes.
As a teacher then Head Teacher, I have attended a huge number of courses.
Very, very few of them were as interesting and inspiring as this course. Thank you.
Ian Sheppard, Whitfield.
The course was great, perfectly pitched for a beginner like me, but also for the more experienced on the course.
I was completely bitten by the bug, so much so that a lovely lathe is now installed in the garage!!
Dave's patience and skill in teaching on the course can only be commended, and his continuing help via email is much appreciated.
Many thanks to Janet for the lunches and tomato chutney recipe!!
Sue Clifford, Four Elms, Kent.
Thanks for a very rewarding and worthwhile two days. Being totally self taught up to now, I realised many of my bad habits and techniques and you were able to offer advice and encouragement in a very non-critical, helpful way without making me seem inadequate.
The course booklet was another unexpected extra of immense value – I have referred to it many times and it is only Monday! Thanks also for helping to get started on sharpening chisels – it was one area shrouded in uncertainly and you at least made it approachable. … Would certainly recommend it to anyone wanting to get started or improve their woodturning skills. Thank you.
Roy Wareham, East Malling.
I bought a lathe a couple of years ago and struggled to make a few things.
Frankly, I was a bit nervous to experiment and uncertain how to develop any real skill, despite all the books and YouTube videos. The course, with Dave’s excellent tuition and constant encouragement, along with his sense of humour, has given me the knowledge and skills I needed to progress and turn with confidence.
I am now totally addicted to turning and my home is inundated with bowls and boxes of all shapes and sizes. I’ve even sold some.
I highly recommend this course to anyone with an interest in woodturning whether they are considering buying a lathe or are just starting out and need to know how to get that perfect finish. The tea and sandwiches were really excellent too!
Sarah Horvath, Ashford, Kent.
I have owned a lathe for five months and have bungled my way through while waiting for the course. If I had to write a specification for the ideal course for me, this course would have been it.
I have learnt a huge amount. I’ve thoroughly enjoyed myself. I feel encouraged to develop my skills further. I was especially impressed with Dave’s enthusiasm.
He must have done this course many times and it was all very basic but he was interested involved and enthusiastic. Thanks.
Gordon Young, Broadstairs.
Exceeded my expectations. I now understand the basics of turning, use of tools and sharpening and know something about the different wood types.
I also understand how the wood for turning is chosen and cut. Thanks for a great course.
Barrie Collins, Meopham.
I thoroughly enjoyed the course from beginning to end. Dave put me at ease with his casual but very knowledgeable style and made me feel confident that I could achieve all that he ‘boasted’.
The workshop facilities were excellent, well equipped and very warm.
I was very impressed and quite envious of the space available. Thank you for sharing your knowledge, a new simmering passion for woodturning has turned almost to an obsession.
Gary Constable, Oxford.
I am just bowled over with the two days I spent on the course.
I came with an open mind, not knowing what to expect and have come away with a good basic knowledge and the confidence in giving it a go. Thanks to Dave and the team (and Alfie) for a very enjoyable couple of days at Upper Farm.
Peter Collins, Epping, Essex.
What can we say? The whole group found it educational and helpful. We will all be fighting over the lathes at the college now!
Thank you for your encouragement and help and thank Janet for the lovely sandwiches. Julie Friday, Dover, Kent.
You run an excellent and tight ship, very understanding and tolerant, very good personal skills, clear and precise instructions, safety and presentation very good but above all, a great and enjoyable time to gain new skills and stop bad practice.
Colin Edwards, Eltham, London.
Excellent course providing plenty of skills to start me off on the right track.
Good teaching and broken up nicely with a bit of banter and humour.
Great facilities, great fun, great sandwiches!
Richard Larner, Chatham, Kent.
Having never turned wood before, we were amazed at the quality of the finished results we were able to achieve with a lot of guidance and a little help.
The course pace was about right and Dave certainly has an extensive knowledge of the subject and of wood.
David and Stephen Hirst, Bexley, Kent.
My expectations in coming on the course were exceeded.
I have a DIY lathe and have tackled a few projects successfully but I wanted to learn the correct way of cutting wood and sharpening the tools before I picked up too many bad habits. I am now busy making various jigs for my grinder and linisher to get my tools into acceptable shape before embarking on some more practice.
In time I am sure I can tackle more demanding projects with competence, confidence and safety, thanks for your help and tips!
John Greenhill-Jeffery, Herne Bay, Kent.
I have scratched and scraped lots of blanks for the past two years and after two days have learnt to turn properly. I am sure that with a lot of practice of my new skills I will turn good quality work and get more enjoyment.
Thank you, not only for the knowledge, but for the sense of humour. It made a very pleasant two days!
D Watson, Canterbury, Kent.
What a fantastic course! The workshop is perfect, being light, warm and well equipped. I was thinking of buying a lathe but was not 100% sure. The course was a great way to make the decision and now I can't wait to be up and running with my own equipment.
Even though I was the only person on the course without my own lathe, I didn't fell left out and the learning pace was comfortable.
There are skilled people, and there are those who have a gift for teaching.
Dave Bates is one of those rare individuals who are both.
Rob Pickering, Reading, Berks.
I enjoyed the course very much. It was well structured and the workshop facilities are excellent.
I would recommend this course to anyone who has bought a lathe and wants to get the best from it.
David Elliott, Sidcup, Kent.
I found the course had the right balance - the number of students, practical and theory. Plenty of tea and sandwiches, a nice touch.
Thanks to Dave's easy manner and content delivery I gained more insight into the 'mystery' of turning than I ever thought I would and took home a bowl that far exceeded my expectations.
A brilliant course and one I would recommend to anybody thinking of taking up this engaging craft.
Simon Mill, Dover, Kent.
What can I say? I am absolutely delighted with the knowledge and skills that I walked away with after attending your excellent two day course.
On reflection, I realised I was probably going to benefit from your course after only having been there for two hours. I was not disappointed.
I found that you had a natural way of communicating the course content without making me or any of the other student inadequate, a very important aspect for a complete beginner such as me. The workshop facilities are superb - very important
I believe when you are just getting to grips with a new hobby.
To sum it up, a very enjoyable course and money well spent.
Phil Taylor, Smeeth, Kent.
I had a great time. I started off never having used a lathe and was taken though all basics. The approach was clearly demonstrated and explained, the hands-on practical opportunities really set things into the memory.
Nothing was too much trouble for David – help and advice were always available.
I really learnt a lot on the course and the big bonus was actually making something that looked half decent. The surprise from family and friends was worth the course fee alone.
Adrian Wright, Dover, Kent.
A really enjoyable course. The pace is excellent, Dave’s explanations very clear and his demonstrations well presented.
His guiding hands during practical work are very helpful even though it probably gives you a false sense of your abilities.
Lovely setting, great workshops, very friendly.
Nick Baggott, Reading.
I am sending this email to compliment you on the beginners/refresher wood turning course. It was intense, full of very useful facts and information, and nothing was too much trouble.
Dave made the whole process very approachable and was patient with mistakes, questions and repeating information and techniques as often as needed! I came away feeling a fairly competent beginnner, able to start and complete a basic project on my own at home.
We were even given homework (in the form of exercises). A great couple of days!
Margaret Wallace, Gloucester.
Thank you for enabling me to be able start woodturning with knowledge and confidence and with safety.
Michael Whitney, Thiers Sur Theve, France.
Overall, a fantastic two days, good instruction in a friendly and hospitable atmosphere. A very well equipped workshop and the fun of turning with others of the same level of experience.
Thanks for your time and obvious enthusiasm for the subject.
Howard Guppy, Chelmsford , Essex.
I did enjoy the course. I’ve developed so much confidence that I can’t wait to start practising the knowledge gained during the course [which] is good value for money.
Adebowale Ajayi, London.
The course was excellent. From start to end, everything was explained very well. I will have no hesitation booking another course at a later date.
Derek Brightwell, Grays, Essex.
We are told that time passes quickly when you are enjoying yourself ! Thursday and Friday just rattle by for me and Saturday proved to be a let down as the course had finished and there was nowhere to go!
I cannot thank S&B enough, for their help and support in making the Beginner Refresher such and enjoyable and informative time.
To Dave I offer my special thanks for the superb instruction we were given and add a request: Please don’t change a thing as the course is so well balanced . . .
To Janet I also add my thanks for more than adequate sandwich lunches and to the rest of the staff – well someone has to prepare the blanks, hone the tools and prepare the workshops etc etc - what a great team you all are!
Bob Barrett, New Romney, Kent.
I felt immediately comfortable with the facilities and trainer. Very please with the products I achieved in only two days. Highly recommended.
R. Dumont, Dartford, Kent.
Before attending the beginners course, I made a point of reading two books on wood turning, one by Keith Rowley and another by Phil Irons. Halfway through the morning of the first day I realised that reading about woodturning was no substitute for a hands-on course.
Dave is a first class tutor, and in my opinion has the happy knack of telling how a project should be done then showing how it is done. He also goes to great lengths to show how to handle tools and the things you can do with them.
I would recommend anyone who is thinking about taking up woodturning as a hobby
to attend one of these courses.
Cecil Armstrong, Deal, Kent.
Excellent course, first class tutor, super workshops.
I gained some knowledge of woodturning, now to practice.
Maurice Gilbert, Ash, Kent.
I thoroughly enjoyed the course, the professionalism, the friendly, informal atmosphere – I very much look forward to returning.
The safety aspect has been imprinted into my brain! I look forward to trying out my new found skills.
Mr R Brooks, Tenterden, Kent.
It was a real privilege to have such an expert woodworker giving lessons for beginners. The instructor also has all the interpersonal skills and human qualities to make him an exceptionally good instructor.
The facilities could not be better in terms of modern, quality machines and the layout of the workshop. Thank you and your tem very much, including the lady who made the sandwiches.
John May, Ashford, Kent.
I had a brilliant time – as happy as a pig in shavings! To take home my ‘works of art’ at the end put the icing on the cake. Many thanks again.
Alison Andreassen, Rochester, Kent.
I feel that anyone like myself that had no previous experience in woodturning, this course is totally necessary, not only [for] the skills but from the health and safety aspect.
I really enjoyed the course as Dave, who enjoys his subject, went into depth about the make up of the wood, seasoning and the use and maintenance of tools. I will recommend this course to anyone that I hear is thinking of taking up woodturning.
Dave Milstead, Kingsdown, Kent.
I really enjoyed my 3 days at the lathe and would have so much liked a week. You have the right mix of fun and work.( I made my comments [on the day] I would like to say that I was the only one who would have liked more time at the lathe).
To get six people together with such different level[s] of skill to work together and have a laugh at our mistakes is not easy and goes to your credit for your skill and teaching ability. Many Thanks also to your wife Janet for feeding us all so well.
Terry Stower, Guildford, Surrey.
I learnt more in 3 days than I've learnt in the last 3 years working on my own.
Thanks very much.
John Keem, Canterbury, Kent.
I was very impressed that despite having to provide every bit of equipment multiplied by seven that no corners had been cut in providing everything necessary for the course. It was a real bonus to learn woodturning in surroundings that are so complimentary to a craft based skill. As someone with a background in building,
I could see that the quality of restoration oozed from every detail.
Although it was obvious that S&B have taken Health & Safety very seriously,
I appreciated the fact that we were not molly coddled during the course.
Enjoyed the little tour of the yard and looking at the equipment and wood store.
Great sandwiches, thanks for a great course Dave.
Simon Burren, Westerham, Kent.
Thank you for an excellent course, not only with the skills and enthusiasm shared by Dave, but by the quiet and efficient backing given by the remainder of the staff - what a team!
J.B , Haywards Heath, West Sussex.
The course was an excellent introduction into wood turning and I would recommend it to anyone taking up wood turning.
As a foundation course, the tools and techniques covered will stand me in good stead for a project I was rather reticent in doing. However, I now have the confidence
to take it on.
George France, Aldershot, Hants.
I could not have wished for a more enjoyable 2 days. It was much better than I could have thought possible, we had fun, learned a lot ( I can now use a skew) and my wife was impressed by the two pieces I took home.
C. Dowsett, South Ockenden' Essex.
A well structured informative course which more than helped me to learn new (proper) techniques on spindle turning which was my main weakness.
Dave is an understanding, patient tutor and although we were fortunate (for us) in only being three on the course, I imaging Dave equally managing six turners with no problems.
Thanks to Janet for the excellent sandwiches - in the words of Arnie Schwarznegger, " I'll be back!"
Tim Roberts, Thorpe St Andrew, Norwich.
Totally absorbing and enjoyable. Not everyone has the ability to point out where you are going wrong without making you feel a complete berk.
Dave Bates has the ability and it makes all the difference. Many thanks, I had a great time!
David East, Folkestone, Kent.
A fantastic course in lovely settings! I was a little concerned at first when I realised that I was the only person who had a lathe already, but at no time was I made to fell that I should have known how to do anything already or my apparent lack of skill mentioned.
I have been using my lathe for eight months and now I feel I know what I should be doing and how I should be doing it. The course covered all aspects of the craft from the tree to the finished item. The extra knowledge really helped [me] to understand the way the wood behaves.
Dave Spitter, Greenhythe, Kent.
I had some interest in wood turning before the course but now I can't wait to get some gear and continue practising what I have learnt.
Pat and Den were great, leaving us to get on with it but on hand if help was needed. . I would strongly recommend you to anyone who may have an interest.
Steve Church, Brighton, Sussex.
Excellent two days, we certainly got a lot for our money.
Alec Marriott, Dover, Kent.
I enjoyed every moment. Den and Pat were patient and very good all round.
Y P Smith, Faversham, Kent.
A very rewarding couple of days spent learning new skills. Enjoyable and informative. Wendy Lloyd, Granada, Spain.
The course was excellent - venue, workshop, attitude ie. friendliness of all involved, food, materials and yes, even the weather was superb.
Denis and Pat were perfect instructors, they gave everyone the level of attention they required; They were always ready to help and answer questions.
Their teaching manner was relaxed but professional and their skill at the lathe very, very good. Could not fault any aspect from booking to completing the course.
Thanks for a very enjoyable few days.
Kevyn Brooks, Maidstone, Kent.
Pat and Dennis are excellent woodturners and extremely willing and able to pas on their knowledge.
There was a definite structure to the course but it only became apparent at the end of the two days. Pat and Dennis are 'hands on' woodturners, not professionals [and] their one-to-one assistance was excellent... I thoroughly enjoyed the two day course, learned some new techniques, picked up some helpful tips and hopefully dropped some bad practices.
An excellent course in the presence of like minded people - very enjoyable.
WB, West Malling, Kent.
I thoroughly enjoyed the two days and was amazed by what I produced - I had really only taught myself some spindle work before, so to come home with a bowl and a goblet was fantastic and a kitchen roll holder as well!
The only improvement I could think of is I would find some course notes really useful as I cannot remember all the methods of chucking, tools etc. I'm sure it will come back to me, but it would have been great to have something to refer to.
Not too detailed :- how wood was held in a lathe (which chucks), sequence of turning, finishing and which tools. An aide memoire as it were.
Thanks for a really enjoyable of a couple of days, though I was shattered by then - too much concentration!
Mrs Hilary Gilmore, West Kingsdown, Kent.
A very informative and helpful, practical course.
A lot was achieved and the majority of the time was spent using the lathe and practicing techniques and skills.The workshop facilities were very good.
The instructors were very helpful, skilled and real experts. I would recommend the course to any turners. A thoroughly enjoyable day.
Roy Pickup, Canterbury, Kent.
Advice and tuition excellent. Friendly atmosphere. Thoroughly enjoyable day.
Lawrie Boston, Brentwood, Essex.
An excellent course, very friendly, good guidance and nice work produced at the end of the day.
R L Ashman, Ashford, Kent.