|Product Code: PEKJIGL|
ProEdge Knife Sharpening Jig Large
This jig, with the use of a new fine belt range gets knife blades scary sharp.
The kit comprises a raised wearplate, universal holder and a large blade holder (recommended for blades over 8”). The small holder is recommended for blades under 8” sold seperatley.
Whichever kit is bought includes the aluminium collar. The same collar is used if the other size holder is bought later.
To use it, it takes a couple of minutes to remove the table and existing wearplate (use 13mm spanner), replace it with the raised wear plate and universal arm. The aluminium collar on the arm is then eyeballed and fixed to a height that gives the bevel you need on the blade.
Both hands are used when sharpening a knife blade, one to hold the blade against the belt and the other to hold the collar on the universal arm. For curved blades, the blade is swept in an arc to keep the bevel on the curve.
For the knife sharpening jig there are three new Trizac belts
in 600, 1200 and 3000 grit.
Some turners and carvers are using these belts to make their tools even sharper.